You are going to need to run some camber in order to get it to fit. 8" is a wide wheel.

 

Oh ok thanks for the reply, yeah I see most ppl running 7-7 1/2", I really like the xxr 531s they only seem to be in 8"

 

I have Klutch SL1 Wheels 16x8 with +15 offset... They fit perfect, and im lowered.

 

You are not tucking and not lowered that much. Looks like you are mexi flush.

 

At 2" you won't need any negative camber to clear the fenders. If OP wants to tuck he will need to drop 2.5-2.75" in which case low offset wheels will hit the fenders unless he rolls them or clears them with negative camber.

35mm is not that low of an offset but combined with the 8" wide wheel it might cause an issue.

 

I got you. Im not a wheel expert. I had negative camber when I first lowered mine. I had to buy the megan racing camber kit to correct it. If I go lower my front lip is gonna rub. Remember I have $160s not 17s.

 

Thats why I haven't installed my lip yet, I don't think I will be able to get into my driveway with it unless I raise the car up which I don't want to do.

I am almost tucking and I am around 2.5" so OP will need to go below that to tuck.

 

Thats why I haven't installed my lip yet, I don't think I will be able to get into my driveway with it unless I raise the car up which I don't want to do.

I am almost tucking and I am around 2.5" so OP will need to go below that to tuck.

[URL=http://i1174.photobucket.com/albums/r617/GolNatP/Car/SAM_1693_zps5e2293ba.jpg]image
[/URL]

Yea thats what im talking about. Still looks great without the lip. :tup: