Suspension Parts :
Raceland Struts
poly bumpstops
Hotchkis camber plates
Hypercoils 4" 600lb
Ground control rubber spacers
Raceland Top hats
Energy suspension bushings
04-05 top hat bearings
Removed top hat collars
Wheel Specs:
Rota C10's 16x7.5 +30 (White)
5mm 4x100 Wheel Spacers
Achellies 205/45/16 XL tires
Pics
Getting to Erics house and jacking up
Started with the rears :tup:
![Image]()
Old setup which was the blue springs compared to the new ones
![Image]()
![Image]()
Getting down to Business we thought that the new Sleeve was gonna be to tall so we cut it down bout 5 threads
![Image]()
The ground control spacers was to thick for the sleeve to fit over so we trimmed them down
![Image]()
Getting spring and spacer and strut all cleaned up and greasy
![Image]()
Putting L screws into the sleeves
![Image]()
After its all said and dunn put thew spring on and top hat on and she is ready to go
![Image]()
And there she goes
![Image]()
After the rears where done we took a break and Got started on the Fronts
Basically same process as the rears and we ended up with this :hs:
![Image]()
when we put them on and lowered it all the way to the perch i still had a finger gap so u guys no what that means CUT PERCHES!!!!! :tup:
![Image]()
after both of them where finished ended up with this
![Image]()
and in she goes
![Image]()
little pic of are mess
![Image]()
Recent pics
![Image]()
![Image]()
![Image]()
Raceland Struts
poly bumpstops
Hotchkis camber plates
Hypercoils 4" 600lb
Ground control rubber spacers
Raceland Top hats
Energy suspension bushings
04-05 top hat bearings
Removed top hat collars
Wheel Specs:
Rota C10's 16x7.5 +30 (White)
5mm 4x100 Wheel Spacers
Achellies 205/45/16 XL tires
Pics
Getting to Erics house and jacking up
Started with the rears :tup:
Old setup which was the blue springs compared to the new ones
Getting down to Business we thought that the new Sleeve was gonna be to tall so we cut it down bout 5 threads
The ground control spacers was to thick for the sleeve to fit over so we trimmed them down
Getting spring and spacer and strut all cleaned up and greasy
Putting L screws into the sleeves
After its all said and dunn put thew spring on and top hat on and she is ready to go
And there she goes
After the rears where done we took a break and Got started on the Fronts
Basically same process as the rears and we ended up with this :hs:
when we put them on and lowered it all the way to the perch i still had a finger gap so u guys no what that means CUT PERCHES!!!!! :tup:
after both of them where finished ended up with this
and in she goes
little pic of are mess
Recent pics
