Search Results for ‘removal’

stupid question i guess but how do you get the coil pack harness out of the way?

Hey guys, I have the stock header, cat, resonator, muffler and I just installed the Progress Rear Sway Bar. However the muffler clangs with the sway bar... what i did to resolve the issue was remove the muffler, and hammer about 1/2 to 3/4 of an inch back on the muffler so the muffler wouldnt...

Ok I've been asked to do a write up on removing the spark plugs. This is a very straight forward DIY but is something that is good to know how to do. Your spark plugs can tell you alot about how your engine is running. Tools Required: socket wrench 8mm socket 5/8" spark plug socket 6" or...

Ok heres the deal. I removed my battery and crap to install cold air intake got it all in looks and sounds great. Now after i reinstalled everyhting i went to use my key lock "thingey" sorry dont know technical term, and the doors locked, but no horn beep and you know when u leave trunk open for...

Hey guys, i just got my megan drift spec exhaust installed and want to take out the silencer but it will not budge one bit, ive tried pliers and wd-40 but no luck.. any suggestions?

ok, i figured at some point someone could use this. i recently had a bolt get sheared off inside my bellhousing due to a broken slave cylinder. so here goes things needed: 1 drill, can be electric, cordless or air powered 1 easy out set - preferably cobalt 1 adjustable wrench 1 can of...

Im changing my broken stud from the front and need some assisstance...i've have already taken off the rotor, and the next step is hammering the stud out, but once i hit the stud it wouldn't move, its stuck somehow....any suggestion..????

Anyone know anything about removing interior pieces? More specifically the ones on the sides? I am talking down on the floor, starting where the latch is for the hood, to the fuel pump door/trunk lid opening is, then back. The first two pieces (basically from the dash to driver seat) was popped...

This DIY is for the Removal and Installation of the Front Motor Mount Rear Motor Mount Transmission Mount If your front and rear motor mounts are broken, I suggest buying inserts from Energy Suspension. They cost around 30.00. These inserts fit around your regular mounts to keep the center of...

whats the best way to remove pin stripe?

wanted to know if anyone has ever tackeled this project. i just didnt know if there is anything i needed to know about the airbag, cluster, etc....... i am going to be doing this soon and just want to know what all is involved in taking it completely out of the car. thanks

whos had it? im 25 and just been diagnosed i need mine out. anybody around my age whos had them out? i heard the older u get the more painful it is. any info would be great. meeting a doc tommorrow. i havent eaten any solid food since friday cuz i cant. hurts to much. only ice cream, soup...

Hey guys.... I just want info on removal of a Auto Tranny on a 01 Civic If anyone has removed an auto transmission for 01-05 civic or manual tranny please tell me how you did it........... tips, and anything else you recommend before I do it. I am going to repace my torque converter, but the...

Anyone have any suggestions on how to keep the inside of the stock rear strut from spinning when trying to loosen the top nut? I'm having some problems changing these springs and my buddy sliced his hand open on my car so now I'm by myself lol.

thanks to Punkingcivic Found here: http://www.tintdude.com/remove.html Materials: Warm sunny day Tarp Large plastic garbage bag Undiluted Ammonia Windex (a glass cleaner) Paper towels Fine steel wool Razor blades Tips: The difficult thing about removing tint is that most film is constructed...

hey guys do u know how to remove tint. im helping out a friend he wants new tint on his cuz the car he bought came with bubbled up tint. wat supplies do i need to remove tint on the rear and the passenger side windows?

Well if your lookin to black out your headlights, install some projector headlights or to install a new grill this might help you out. Tools your gonna need- -10mm socket -8mm socket -flathead screwdriver -pliers -phillips head screwdriver -a fairly large extension for the...