Search Results for ‘manual’

I've recently had a problem that when I'm in reverse with the clutch engaged, there is a rattling or grinding type noise coming from the front. It's only with the clutch engaged and is worst when it is fully engaged. As I don't drive in reverse that much I'm not too worried at the moment. The...

Just Limo tint and a pioneer blue tooth stereo. Revo version 2 Short throw, shifter cable bushings and LED lights to replace bulbs(all over, inside and out, except headlamps) on the way, Then just keepin it clean and running as good as possible...165K+ mileage

As you might assume, I love this car! It has 86K miles and some needed repairs: -sway bar links & bushings replacement(front) -major oil leak needs diagnosis -right front cv joint boot ripped I want to get this car fully fixed so I can begin to pursue the fun of modding! I'll be looking for...

Alright we are going today we are going to crack open the Manual trans. DISCLAIMER : If you do not know how to pull the trans out of your own car then go away this is too big of a job for. This is not a beginner move it is for some one who is mechanically experienced! If you take apart your...

As everyone can tell there are a lot threads on changing your transmission from auto to manual, However they're mostly build threads then an actual DIY. So here is my attempt to write one. these direction are very General, with not much detail, This was made for people that are comfortable on...

I got a d17a2 in my 04 sedan and well I know for sure my Input shaft bearing is gone on my manual trans, I had a mechanic at one tranny shop say he can replace that one bearing, but another said that its a waste of time to replace one bearing due to the fact "if ones gone their is more on there...

I know its popular to go auto to manual but im curious if its possible to just switch everything around and go manual to auto? i searched and only found m-a. anyone know why this wouldnt work? :dunno: no b.s. comments about going to auto. im awaiting a killer deal on another car and can...

hey i don't know if this is a repost but i found this online and thought i'd post it. https://techinfo.honda.com/rjanisis/pubs/om/CI0101/CI0101MAINIDX.pdf

I want to switch my car from automatic to manual. Can someone give me a possible list of EVERYTHING i would need. and maybe an estimate on how much it all would cost. Thanks again.:tup:

Anybody know were i could get one for my car?

http://www.spoonhonda.com/SearchResults.asp?Cat=119&Redirected=Y Sure thing boss. Free download of the Helms manual. Most Honda/Acura's. It shows our years 01-02 but I'm pretty sure most of it can be transferred over to use with 03(same as 01-02) & 04-05. Enjoy.

Hey guy's I was wondering where the best place is to get a Chilton manual because, at the Pepboys in my area they don't have them and if I get the Haynes manual are they identical? I was looking through the Haynes manual and they had nothing about the speed sensor which I might have to place on...

need help any info suggestions to change my car to manual and a k20 swap any info suggestions list of parts i need places to get them will help thanx

I created this because I couldn't find a existing DIY. Hopefully someone will get some use out of this DIY. This DIY was performed on a 2005 Civic LX Sedan. :thumbup: DIY: Convert your automatic shifter console to the manual shift boot console Parts & Tools Needed: - Phillips Screwdriver -...

Here is what happened to me the other day. I was driving, I got into it, hit second, fine, then went to third and I missed and went into first. Rpm's went to about 8500-9000. Thought for sure the motor was gone. It was fine though. But what I am now hearing is a whining sound from the tranny for...

Hey guys, I just wanted to ask, Do you need to replace the axles when swapping an 01' Tranny to a '03 Tranny? If you do, Why does it need to be replaced?

How Much Tranny Fluid do our cars take? I want to flush mine.

Does any one have a DIY for a tranny swap? If possible i am looking for a list of parts that i would need and a guide on how to do it... Thank you in advance -Mike

check out this auction!

is there a downloadable version. i need to know torque specs of various bolts