Search Results for ‘d17a2’

Hey guys, I'm new being a user, but I've lurked for years. Sorry if this has already been discussed, I searched but couldn't find anything recent. Since Crower stopped selling camshafts, what other alternative do we have? Regrinds are okay, but not preferred, and Crower doesn't offer them for...

Got this used em2 that was manual swapped. Apart from the check engine, abs, and maint required light being on solid, I'm trying to wire my reverse lights to work now. There's a thread here that has instructions but i think my harness is a different one. I don't have a solid yellow instead I...

hey everyone Im Danny from the states and i recently got an Em2 im trying to build it up but i don't really know much , my budget is limited since im only 17. But here she is now, this was today (: <3

Ok so one of my valve cover bolts broke off in to my head and now I need to re tap the hole or put in a helier coil but I can't find the thread pitch for these bolts any were pleas help I need to fix this ASAP I have school in like 4 days

Hey everyone. :wave: I just started piecing parts together for my boosted d17 build. This is my side project while going to college so its going to take a while and im hoping to be done in the 5 years that ill be at school. Before anyone says this is a waste of money blah blah blah - I don't...

Okay, so I currently run a D17A2 with a cold air intake, header, and maybe hopefully soon a DC Sports exhaust but I have been kicking around the idea of doing a complete engine swap. However, I'm not sure if i should swap for a K20A2, B16B2, or a H22. If anyone has any advice on what they think...

Does anybody know a good exhaust to get for a em2 with A D17A2? Also something relatively low in price too that would be great. I'm looking for something that isn't obnoxiously loud, something with a nice deep tone like the GReddy EVO2... thanks

My EM2 SI(Canada)is dead off the line. Anyone try a high stall converter yet? Are they worth the money? Where to get one? Thank you.

Most North American 7th gens got P-R-N-D-D3-2 on the gear selecter. But underneath the gear shift,you can cut out a piece of plastic to allow the shifter to go back past 2nd to where 1st should be. Anyone tried this yet and got the tranny to stay in first? I did and it didn't make any differance.

Anyone know where I can get an D17A2 head for cheap? Doesn't need to be in the very best condition, I plan on changing the cam, valve springs, and retainers anyway... Hopefully everything else would be in good shape...??? Any suggestions from someone that has done this swap already would be...

My D17A2 03-Civic turbo thread (400whp - Bosch Dyno) Greetings! I started a thread like this one in d-series.org, but felt like starting it here too, as many D17 projects are here and their informations are helping me a lot... My name is Renato, I'm from Brazil and I'm rebuilding my D17A2...

yo guys, ight so.......... one of the few shops ive had work on my car through out the years decided it was a genius idea to pull the secondary o2 sensor with out my knowing, wires and all. i need the ecu pinout diagram so i can jus wire this dam thing up myself so i can finally take the...

got it thank you!

....... well its gone ....

Hey guys..I got a 2004 civic ex. I turbo'd it in Feb 08. The car is running fine until recently. The problem is that it will not hit full boost anymore. In 1st gear it will only go to about 2 psi. I have a 6 psi spring in the wastegate. In 2nd gear it will maybe hit 4 psi. But it does not pull...

i was wanting to get turbo on my em2 i was wondering were can i get one? and what do i need to make it run im runnin it on stock motor but will build the motor. is any one runnin turbo on a stock d17a2 how is it runnin how many horse power u gettin and does it smash?

what is the approximate weight of a d17a2 head?

Alright so awhile ago, mid-winter, I made a post complaining about my gas mileage. Summer has come around, gas prices have went up and my mileage isn't improving. The car has under 75 000km (46 600 miles) and I'm getting roughly 400km (248 miles), before I hit e-light. I can run the car for...

im going to be boosting soon, i just want to know if i need more parts. this is what i have already.... Garret T-25 turbo HKS manifold custom DP Front mount intercooler Blitz BOV All piping and oil lines walbro fuel pump SRT-4 injectors with harnesses AEM FIC with harness manual boost control...

so my dad bought a roll over z6 eg today when it came into the shop i saw the custom fabed intake manifold right a way and dc sport headers. will this stuff fit on the d17a2. if not ill swap the z6 into the hatch so i can have a slightly fast hatch no worries