Honda Civic Forums - 7thGenHonda banner

Todd is making another batch of his custom caster/camber plates

11K views 52 replies 12 participants last post by  lowlife9 
#1 · (Edited)
PRE-ORDERS ARE NOW BEING ACCEPTED!
http://www.dvrace.com/caster.html


------------------------

I was bummed when Todd (on ClubRSX) discontinued his custom caster/camber plates before I was able to scrounge up the extra money. Now he is offering to make another batch if he gets 12 deposits. So far, 8 people has committed to buying. Once he gets 12 commitments, he will take 50% deposits. For anyone interested, email Todd @ todd@teamspirit.net

Thread (starts at post 212): http://forums.clubrsx.com/showthread.php?t=665014&page=9
Product page: http://www.dvrace.com/caster.html

-----------------------

EDIT 2/8: Deposits are now being accepted. You can make your deposit here:

http://www.dvrace.com/caster.html

Once he gets all 12 deposits, the plates will go into production. If he doesn't get 12 deposits, the plates will not be made and you will be refunded 100%. Plates will take 4-5 weeks to complete, according to Todd:

Todd said:
It will take a week for the material to arrive. A week to machine everything. Thee I send out the aluminum parts for hard coat anodizing and the steel parts for nickle plating. That will take two weeks. Finally a few days to assemble and ship. So if all goes well, it will take four to five weeks.
Pics of the plates:





 
See less See more
3
#7 ·
they were about $400 before plus shipping and extra stuff if you want it. these are definitely a GREAT piece for front alignment adjustment. something very rare to find on our cars. i would get these over hotchkis plates any day. well worth the money.

only downfall (not really a downfall), is that these are only for coilovers. you cant use them on stock suspension, which i dont know why you would even need to adjust caster/camber with stock suspension anyways.
 
#16 ·
o hell yeah 5.7 degress of caster thats way better than our 1 dregree and almost close to the s2k's caster, o man i'm deff getting these even if i have to take out a loan, but i should be able to get these with my income tax money/paycheck next week. When does he need the payment by? why doesnt he just make them to mount on top of the shock tower so that we have extra travel?
 
#19 ·
Thanks man, well ima get these and see if my gpa can fabricate some extended top hats to mount on top of the shock tower, but im deff putting in my deposit next week, cause i wanna track my rokkors with 14mm bolts and see if they can withstand the pressure cause i drive them hard and they do just fine on the street. Then hopefully i can get a thread stickied so people can stop asking dumb questions. Sorrry for the rant
 
#27 ·
ahhh...
if i was planning on getting coilover adjustable...
but no, happy with the AGX/Eibach, so...
i spread the word out, saw some interest, but nothing yet from them, i see...
free bump to the top
 
#29 ·
This is great news. Todd sent an email out a couple weeks ago letting people (who had been begging for another batch)...these are perfect for those with coilovers. Happy for you guys:tup:

I ended up getting the Hotchkis plates (no longer available) because I eventually want to upgrade to Koni DA race struts.:coffee:
 
#30 ·
For those that pre-ordered the plates...

Todd said:
The machining is done!

Tomorrow the parts go to the anodizer. They should finish them by April 1st.

It will take me a couple days to assemble and ship them. I will send Paypal bills to everyone for the balance and the shipping. We made extra shoulder nuts and I will put those on the web site. If you want extra shoulder nuts and spacers so you will have both sizes, let me know and I can add them to the bill. They are $38 for the kit.

If you put down "I do not know what size" when you ordered, now would be a good time to figure it out. I am in no rush, so if you do not know and do not mind waiting for your plates. I don't mind either.

I will be out of town next week.




 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top