Honda Civic Forums - 7thGenHonda banner

Todd is making another batch of his custom caster/camber plates

11K views 52 replies 12 participants last post by  lowlife9 
#1 · (Edited)
PRE-ORDERS ARE NOW BEING ACCEPTED!
http://www.dvrace.com/caster.html


------------------------

I was bummed when Todd (on ClubRSX) discontinued his custom caster/camber plates before I was able to scrounge up the extra money. Now he is offering to make another batch if he gets 12 deposits. So far, 8 people has committed to buying. Once he gets 12 commitments, he will take 50% deposits. For anyone interested, email Todd @ todd@teamspirit.net

Thread (starts at post 212): http://forums.clubrsx.com/showthread.php?t=665014&page=9
Product page: http://www.dvrace.com/caster.html

-----------------------

EDIT 2/8: Deposits are now being accepted. You can make your deposit here:

http://www.dvrace.com/caster.html

Once he gets all 12 deposits, the plates will go into production. If he doesn't get 12 deposits, the plates will not be made and you will be refunded 100%. Plates will take 4-5 weeks to complete, according to Todd:

Todd said:
It will take a week for the material to arrive. A week to machine everything. Thee I send out the aluminum parts for hard coat anodizing and the steel parts for nickle plating. That will take two weeks. Finally a few days to assemble and ship. So if all goes well, it will take four to five weeks.
Pics of the plates:





 
See less See more
3
#43 ·
Unless you can find Todd's plates, your only options are Ksport and Tein pillowball mounts. Both are sold separately. These will allow camber adjustment but not caster (unless you're able to reverse them L <--> R).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top